Xerox 785 User Manual
Transmitting Documents
WorkCentre Pro 665/685/765/785
5-3
Memory Send or Direct Send Default Mode
In the “Memory Send” mode, the machine first scans the document
into memory, then dials the number and sends the fax. The Memory
Send mode allows up to 100 jobs to be reserved and sent as the line
becomes available. Any operation initiated using one of the dialing
methods: One Touch, Speed Dial, Alpha, or Keypad Dialing is
automatically performed as a Memory Send transmission.
into memory, then dials the number and sends the fax. The Memory
Send mode allows up to 100 jobs to be reserved and sent as the line
becomes available. Any operation initiated using one of the dialing
methods: One Touch, Speed Dial, Alpha, or Keypad Dialing is
automatically performed as a Memory Send transmission.
The Direct Send mode can be selected as the default setting or
selected from the Control Panel for one operation. This mode can be
selected when residual memory is low or a very large document is to
be transmitted. In this mode the machine sends each page as it is
scanned.
selected from the Control Panel for one operation. This mode can be
selected when residual memory is low or a very large document is to
be transmitted. In this mode the machine sends each page as it is
scanned.
Set the Memory Send mode to OFF to enable the Direct Send
transmission mode.
transmission mode.
To change the default transmission mode:
1.
Press:
Menu
Memory send
1. On
2. Off
1. On
2. Off