Xerox 421 User Manual
WorkCentre Pro 421 User Guide
4-7
Pr
int
5. Retrieve the Print Job
The print file is received by the WorkCentre Pro 421,
processed and interpreted and then printed. Your print job will
be delivered to the output area selected on the printer driver
when the job was sent.
processed and interpreted and then printed. Your print job will
be delivered to the output area selected on the printer driver
when the job was sent.
At the Printer the LCD may, on occasion, display the following
messages:
messages:
½
If this message is displayed it
is necessary to wait for the job
to finish processing and be
printed before you can use the
WorkCentre Pro 421 again.
is necessary to wait for the job
to finish processing and be
printed before you can use the
WorkCentre Pro 421 again.
Job processing...wait
Paper :
Auto
Output :
Collated
Added Features
L/D
: Auto
R/E
: 100%
1
½
If this message is displayed
your job is too large to print all
at once. The job will be
divided into smaller sections
and printed one section at a
time.
your job is too large to print all
at once. The job will be
divided into smaller sections
and printed one section at a
time.
NOTE: If you have this
message and you have selected
two or more sets, only one set
will print out. You will need to
resend the job for another set or
make copies.
message and you have selected
two or more sets, only one set
will print out. You will need to
resend the job for another set or
make copies.
Job exceeds memory...wait
Paper :
Auto
Output :
Collated
Added Features
L/D
: Auto
R/E
: 100%
1