Xerox M24 User Manual

2–69

U

S E R

 G

U I D E

 (P

R I N T

)

This section identifies differences in paper usage as compared to 
paper usage when copying. Other than these, there are no 
differences between using paper for copying and printing. 
For more information on how to load paper, refer to the User 
Guide (Copier).

When using Tray 5 (Bypass), there is a restriction on the 
orientation of loading paper.
When printing with Tray 5 (Bypass), be sure to select Tray 5 
(Bypass) from the Paper Source menu on the Tray/Output tab, 
and then select the correct paper type from the Paper Tray 
(Bypass) menu on the print driver screen.
For details on loading paper in Tray 5 (Bypass), refer to the User 
Guide (Copier).

If the paper size or type used for printing is different from the 
selection on the print driver, or if the paper is loaded in an 
unsuitable paper tray, it may cause paper to jam.

To enable the Auto Tray Switch feature, Auto must be selected 
from the Paper Source menu on the Tray/Output tab.

To use the Job Offset feature you must first configure the setting 
on the Configuration tab of the print driver.