Xerox M24 User Manual

1–9

U

S E R

 G

U I D E

 (C

O P I E R

)

Trays 1,2,3 and 4 are located at the lower front of the printer/
copier.  Tray 5 (Bypass) is located on the left side of the printer/
copier.  

Trays 1and 2 are adjustable from 5.5x8.5 in. through 11x17 in. (A5 
through A3) and can accommodate up to 520 sheets based on 
paper weight.  Trays 3 and 4 are high capacity paper trays and 
can accommodate a total of 2000 sheets, 8.5x11 in. (A4 and B5) 
based on paper weight.

Trays 1 through 4 are adjustable from 5.5x8.5 in. through 11x17 in. 
(A5 through A3) and can accommodate up to 520 sheets based 
on paper weight

Feeds specialty papers i.e. Transparencies, Extra Heavyweight 
and non-standard sizes and 12x18 in.
Trays 1 - 4 can feed paper weights 64 to 105 gsm.  The machine 
automatically detects the size and orientation of loaded paper.  
The paper type however must be set on the control panel.  Bond 
paper is the default setting. Plain or Recycled paper in trays must 
be identified on the control panel for maximum efficiency and 
image quality. This is set in System Settings mode.

The Center Output Tray delivers output face down, and holds up 
to 400 sheets. The Center Output Tray holds up to 200 sheets 
when the Finisher (optional accessory) is installed.
The Finisher Tray (optional accessory) holds up to 1000 sheets, 
and can staple dual and single staples.