Xerox M24 User Manual

1–21

U

S E R

 G

U I D E

 (C

O P I E R

)

Transparencies can only be fed from Tray 5 (Bypass). Stripeless 
transparencies are recommended. Striped transparencies must be 
loaded with the stripe face up, on the left side of the tray.

Recommended Materials for the WorkCentre 24. 
After loading the transparencies you can program the copier 
printer to insert a blank separator page between transparencies by 
using the Transparency Separators feature. 
For more information about the Tranparency Separators feature, 
refer to the section entitled Transparency Separators, in this 
chapter.
Follow these guidelines to prevent static build up when using 
transparencies:

•

Place no more than twenty 8.5x11 inch or A4 transparencies in 
Tray 5 (Bypass) at one time.

•

Place only one 11x17 in. or A3 transparency in Tray 5 
(Bypass) at a time.

•

Remove the transparencies from the Center Output Tray 
before running additional sets.

For more specific information about materials that have been 
tested and approved for use in the WorkCentre 24, refer to the 
Recommended Materials for the WorkCentre 24. Information is 
also available off the main Xerox web site (www.xerox.com) and 
will be updated periodically.