Xerox 8510 User Guide

If you use EtherTalk, Macintosh computers do not require IP addresses. 

Follow these steps to install the printer driver:

Open the AppleTalk Control Panel.

Verify that the Ethernet port is the selected network port.

Double-click the installer on the Software and Documentation CD-ROM to install the 
printer driver.

Open the Chooser, and then click the LaserWriter driver.

From the right column of the Chooser, select the system, and then click Create to create 
the desktop system.

 

Set up your system using Bonjour (Rendezvous), create a desktop USB connection, or use an 
LPD/LPR connection for Macintosh OS X, versions 10.2 and higher.

 

To install the printer driver from the Software and Documentation CD-ROM:

Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the 
printer software.

When installation is complete, select one of the following options:

■

Open the Print Center utility for Mac OS X, version 10.2.x. 

■

Open the Printer Setup Utility for Mac OS X, version 10.3.x. 

To locate utilities on the Macintosh hard drive, open the Applications folder, and 

then open the Utilities folder. 

Confirm that the first drop-down menu is set to Bonjour (Rendezvous).

Select the system in the window.

Select Xerox from the list of manufacturers in the lower drop-down menu.

Select the appropriate system model from the list of available devices.

Click the Add button.

 

Advanced Features Guide at 

Knowledge Base at