Xerox 8510 User Guide

Use either the document glass or the document feeder to make copies. Load the originals to be 
copied and follow the steps below to make copies. To clear the settings from the previous job, 
press the Clear All button once.

 

For additional copying information, print the Copying Guide. On the control panel, 

press the Copy button, select 

, and then press the OK button to print the guide.

 

On the control panel, press the Copy button.

Enter the desired number of copies using the control panel keypad. The number of copies 
appears on the upper, right corner of the display.

Select 

, and then press the OK button.

Select 

, 

, or 

, and then press the OK button.

Press the Start button.

■

If you placed originals in the document feeder, copying continues until the document 
feeder is empty.

■

When collation is on and you are copying from the document glass, the system copies 
the first page and then displays the prompt 

. If you do not 

want to see this message, turn collation off before starting your copy job.

 

Because the Phaser 8510/8560MFP product is often used on networks, the system 

may be printing a job when you want to use the copy or fax features. The system can be set 
up to allow copy or fax jobs to interrupt print jobs. See page 4-20 for information on 
setting this option.

Lift the document feeder or the document glass 
cover, and then place the original facedown on 
the back, left corner of the document glass.

 

Insert originals faceup with the top of the page 
entering the feeder first. Adjust the paper 
guides so they fit against the originals.

 

8560-044

8560-045