Xerox XK35C User Manual
70
Troubleshooting
Paper Feeding Problems
(continued)
Symptom
Cause and Solution
Paper skews or buckles
Q
Ensure there is not too much paper in the
Automatic Paper Feeder. Depending on
the thickness of your paper, the feeder
can hold up to 100 sheets of paper.
the thickness of your paper, the feeder
can hold up to 100 sheets of paper.
Q
Make sure the paper guide does not
cause the paper to bow in the Automatic
Paper Feeder.
cause the paper to bow in the Automatic
Paper Feeder.
Q
Make sure you are using the correct type
of paper. See Section 1
of paper. See Section 1
Getting
Started/Paper Guidelines.
Q
When loading paper, do not force the
paper down into the machine.
paper down into the machine.
Q
Make sure the right side of the paper is
aligned with the right edge of the feeder,
and the left paper guide is set against the
left side of the paper.
aligned with the right edge of the feeder,
and the left paper guide is set against the
left side of the paper.
Q
Make sure the envelope guide is not in
the envelope position.
the envelope position.
Transparencies stick
together in the paper
exit.
together in the paper
exit.
Use only the transparencies specially
designed for an ink jet printer. Remove
each transparency as it exits from the
printer.
designed for an ink jet printer. Remove
each transparency as it exits from the
printer.
Envelopes skew or fail to
feed correctly.
feed correctly.
Q
Ensure that the envelope guide has been
turned upright to the envelope load
position.
turned upright to the envelope load
position.
Q
Ensure that the paper guide is against
the left side of the envelopes.
the left side of the envelopes.