Toshiba e-STUDIO4500c/5500c User Manual
PAPER FEED
August 2006
6-104
6.13.2 DRIVE
An independent paper feed motor [A] drives the rollers in each tray. The motor also
drives grip rollers [B], which pull the paper out of the tray. This mechanism is
identical for each tray.
drives grip rollers [B], which pull the paper out of the tray. This mechanism is
identical for each tray.
A vertical transport sensor [C] at each feed station detects paper jams.
The paper feed motors of each tray drive the vertical transport rollers, opposite to
each feed station (not shown).
each feed station (not shown).
The lower relay motor [D] drives the lower relay roller [E], halfway between trays 1
and 2. The lower relay roller is added here because the paper path is very long.
and 2. The lower relay roller is added here because the paper path is very long.
The upper relay roller [F] feeds each sheet to the registration roller. The bypass
feed motor (not shown) drives the upper relay roller [F].
feed motor (not shown) drives the upper relay roller [F].
The relay sensor [G], at the top of the vertical transport path, triggers the start of
image exposure on the OPC drum, and detects jams in the paper path.
image exposure on the OPC drum, and detects jams in the paper path.
The transport guide plate [H] swings against the side of the machine and locks in
place.
place.
B132D923.WMF
[A]
[B]
[C]
[G]
[F]
[D]
[E]
[H]