Xerox 120 User Manual
Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document
- 9 -
Item
Comments
Meet room
Environmental Specifications
for
temperature and relative humidity year round
This is essential to the system’s ability to perform
as expected; Xerox will not be able to resolve
performance problems encountered when the area
is not maintained within this operating range
as expected; Xerox will not be able to resolve
performance problems encountered when the area
is not maintained within this operating range
Install a network drop for Internet access
Connect system to network including proxy
server information
server information
System Installation
Allow 4 to 6 hours to complete the system installation.
Operations
Item
Xerox Nuvera™ 100/120 Digital
Copier/Printer
Comment
Power Up
•
Warm up from Power Saver -
3.5 minutes.
•
System ready to print queued jobs -
4 minutes, 45 seconds. (From Off)
•
System UI fully available for Copy programming -
7 minutes. (From Off)
•
The system may be powered down at night or for
any extended period of time as long as the space
is maintained at the specified temperature and RH.
is maintained at the specified temperature and RH.
If the environment does drift
outside the specified range
during the systems powered
down state, some period of
image degradation can be
expected at startup.
outside the specified range
during the systems powered
down state, some period of
image degradation can be
expected at startup.
First Copy Out
Time (FCOT)
Time (FCOT)
8.5 seconds
Copy job sent to the top tray;
platen scan, simplex job, 8.5 x
11 LEF fed from tray 1; no
Insertion Module
platen scan, simplex job, 8.5 x
11 LEF fed from tray 1; no
Insertion Module
First Print Out
Time (FPOT)
Time (FPOT)
9.5 seconds.
Printer should not cycle down
as long as it receives an image
to print within 5 seconds of
completing the previous sheet.
as long as it receives an image
to print within 5 seconds of
completing the previous sheet.
Restart Time
•
System ready to print queued jobs -
3 minutes 40 seconds.
•
System UI fully available for Copy programming -
5 minutes, 45 seconds.
Billing Meters
Available via the Administration window.
Vary by operating company /
country; ask local analyst or
sales representative to explain
your meter operation.
Automated reading of the billing
meter is available, If Remote
Services are enabled
country; ask local analyst or
sales representative to explain
your meter operation.
Automated reading of the billing
meter is available, If Remote
Services are enabled
Supplies and Component Yields
The consumable supplies listed below are engineered specifically for use in the Xerox Nuvera™ 100/120
Digital Copier/Printer and provide the highest and most consistent image quality, maximum machine
productivity, and uptime.
Digital Copier/Printer and provide the highest and most consistent image quality, maximum machine
productivity, and uptime.