Toshiba 350 User Manual

e-STUDIO350/352/353/450/452/453

DRUM RELATED SECTION

 -

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

[A]   Cleaner unit
(1)  Open the front cover, take off the toner bag

and front cover (   Chapter 2.5.1 [A]).

(2)  Take off the developer unit (   Chapter

12.5 [A]).

(3)  Open the bypass unit, ADU and jam access

cover.

(4)  Release the latch and remove the toner bag

full detection sensor-2.

(5)  Loosen 2 screws and take off the cleaner

unit.

Notes:
1.  Hold the cleaner unit which has been taken off

as shown in the figure.

2.  Do not touch the drum surface.

[B]   Main charger
(B-1) Main charger
(1)  Take off the cleaner unit (   Chapter 11.6

[A]).

(2)  Release the latch and pull out the main

charger to the direction of the arrow.

Note:
Be careful not to touch or scratch the drum
surface at this time.

(B-2) Main charger grid
(1)  Push the terminal head at the front side and

remove the grid.

Note:
Do not touch the mesh area of the grid.

04/01