Xerox C118 User Manual

Press the <Start> button on the control 
panel to scan and send the documents.

NOTE: If a problem, such as a document jam or memory full error, occurs while 
scanning multiple documents, the job is canceled and the scanned data deleted. To 
resume the same operation, load all the documents again and press the <Start> 
button.

NOTE: If the memory full error occurs, delete unnecessary files.

NOTE: If the machine is restarted during a fax transmission due to a loss of power or 
machine malfunction, the machine will start sending the document all over again when 
the machine is switched on. All pages of the document will be transmitted regardless 
of how many pages have already been sent to the destination before the power loss. 
For example, if the transmission of a 7-page document is interrupted when the sixth 
page of the document is being sent, the machine sends all seven pages when the 
power is restored, including the first five pages that had already been sent before the 
interruption.

Follow the steps below to confirm the fax job you started.

Press the <Job Status> button on the 
control panel to display the Job Status 
screen.

The job being processed will be displayed on 
the Current screen.

If required, press the <I> or <J> button to display the All Jobs screen.

Select [Fax/E-mail] using the <Select> button.

Select [Send] using the <Select> button. The job will be displayed on the screen.

Follow step 1 to manually cancel a fax job during document scanning. After scanning 
the document, follow steps 2 through 3.

<Start> button