Toshiba 353 User Manual

e-STUDIO350/352/353/450/452/453

SCANNER

6 - 17

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

[D]  Exposure lamp
(1)  Take off the original glass (   Chapter 6.7

[A]).

(2)  Take off the front upper cover (   Chapter

2.5.1 [E]).

(3)  Move the carriage-1 to the center position

where the side of the frame is cut out.

(4)  Disconnect 1 connector from the INV board.
(5)  Release the harness from 1 harness clamp

and pull out the harness from the frame of
the carriage.

When disconnecting the connector, make
sure not to overload the carriage frame.

(6)  Move the carriage-1 to the position where

the exposure lamp is seen through the cut-
out of the frame.

(C-2)  LT series
(1)  Take off the lens cover (   Chapter 6.7 [B]).
(2)  Disconnect 1 connector from the SLG

board.

(3)  Release the harnesses from 6 harness

clamps.

(4)  Remove 1 screw each and take off the APS

sensors (4 pcs.).