Toshiba 242 User Manual

202    Before Calling Service Technician

The copy image is fogged.

There is a slight gap 
between the original glass 
and the original.

Lower the Platen Cover (optional) or the 
Reversing Automatic Document Feeder 
(optional) / Automatic Document Feeder 
(optional) fully so that the original will con-
tact with the original glass.

The copy paper is damp.

Replace with dry copy paper.

The density level of the copy 
image is uneven in a horizon-
tal direction.

The transfer charger wire is 
dirty.

Clean the transfer charger wire.

The copy image is partially 
missing.

The size or direction of the 
copy paper and the original, 
or the reproduction ratio is 
not set properly.

Use copy paper of the same size as the 
original or set the reproduction ratio suit-
able to the copy paper size.

The margin for binding is too 
wide.

Adjust the image shift value again.

The copy image has black 
streaks in a horizontal direc-
tion.

The scanning area or guides 
are stained.

Clean them. 

The charger is dirty.

Clean the charger.