DELL 7d1 User Manual

Page of 186
Network [x] Software Error
[x] is the number of the network connection.
Try one or more of the following:
Press 
 to clear the message.
Turn the printer off and then back on to reset the printer.
Out of Paper in Tray [x]
Try one or more of the following:
Load the specified paper in the tray.
Press   to cancel the current job.
Paper Tray [x] Detected
Try one or more of the following:
Press 
 to clear the message.
Use the arrow buttons to select Change Settings, and then select the paper size and paper type of the media loaded.
Press 
 for each selection.
Paper Tray [x] Removed
Do one or more of the following:
Insert the specified paper tray into the printer.
Press 
 to clear the message.
Printer Memory Full
Try one or more of the following:
Depending on your printer model, touch OK or press 
 to clear the message, and then try printing again.
From the computer, adjust the printer settings to reduce the quality of the print job, and then try printing again.
Printhead Cannot Move
Try one or more of the following:
Open the printer to remove any obstructions to the printhead, and then close the printer.
Press 
 to clear the message.
Troubleshooting
136