Canon 2830 User Manual
Restricting New Addresses
6-33
6
System Mana
ger Settin
gs
Restricting New Addresses
This mode enables you to restrict the entering of new destinations. When you set
Restrict New Addresses to 'On' while the machine is in the System Management
mode, the following is restricted:
Restrict New Addresses to 'On' while the machine is in the System Management
mode, the following is restricted:
•
Specifying a destination using
-
(numeric keys) (including Forward
destinations on the RX Job Status screen)
•
Redialing the last destination
•
Registering destinations in the Address Book
•
Sending faxes from a computer using the fax driver
IMPORTANT
Restrict New Addresses can only be set by the System Manager.
NOTE
The default setting is 'Off'.
1
Press
(Additional Functions)
➞ [System Settings] ➞
[Restrict New Addresses].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
Manager ID and System Password using
-
(numeric keys)
➞ press (ID).
NOTE
If the desired setting is not displayed, press [
▼] or [▲] to scroll to the desired
setting.