Canon 2830 User Manual

Glossary

App

end

ix

Simple Mail Transfer Protocol. A TCP/IP protocol for sending messages from one 
computer to another on a network.

Applies a stamp (about 1/8" (3 mm) in diameter) on the front side of originals after 
they have been scanned, so that you can distinguish already scanned originals from 
others.

Use this setting to send normal, typewritten, or printed documents containing only 
text and no drawings, photographs, or illustrations. See Fine, Super Fine, and Ultra 
Fine.

Subaddress is the global telecommunications standard specified by the ITU-T 
(International Telecommunication Union-Telecommunication Standardization Sector). 
When the remote party's machine supports the same standard, confidential or 
relayed communications are possible by attaching a subaddress and a password in 
advance.

A resolution mode for sending originals at four times the detail of the Standard 
resolution mode. If the receiving machine does not support this mode, the document 
is automatically sent in the Fine mode.

Super G3 is a phrase used to describe the generation of fax machines that use ITU-T 
V.34 standard 33.6 Kbps modems. Super G3 high-speed fax machines allow a 
transmission time of approximately three seconds per page, which results in reduced 
telephone line charges.

Depending on the type of telephone line that you have, set the machine to touch tone 
(T) or pulse (P) dialing.

Some data services may require that you use tone dialing. If you have a pulse dial 
telephone, press [Tone] to switch temporarily from pulse to tone dialing when 
connecting to these data services.