Pandigital V2.6 User Manual

Set Up Wi-Fi Network

Since many features require a Wi-Fi connection, we recommend you set up your
Wi-Fi network now.

1. Select

Settings

from the Application Quick Launch Bar,



tap

Network

2. Turn Wi-Fi on by tapping the

Wi-Fi is off/Turn on Wi-Fi

3. The device automatically scans and list all local Wi-Fi Networks found. A

indicates secure networks that require login name/password to connect.

4. Tap the desired network to which you want to connect,



enter the

Network

Password

if applicable.

5. Tap

to close the

Settings

screen.



If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap

Other

and then enter the network name and key,



tap

Save



(Advanced): After saving the Wi-Fi network, you can change your network
settings by selecting

Manual Setup

, and then follow the prompts.



The Wi-Fi icon on the top of screens indicates the status as follows:

= Connected

= Not connected, Wi-Fi turned ON

= Not connected and Wi-Fi turned OFF (power saver)



When the device goes into sleep mode, the Wi-Fi disconnects from the local
network, but will automatically reconnect when out of sleep mode (may take
up to 30 seconds to reconnect).

Connecting to Public Wi-Fi Hotspot

If you are connecting via a public Wi-Fi hotspot, it may be necessary to
immediately launch the browser and provide the hotspot login information prior to
having an active internet connection.