Pandigital V2.6 사용자 설명서
15
Set Up Wi-Fi Network
Since many features require a Wi-Fi connection, we recommend you set up your
Wi-Fi network now.
Wi-Fi network now.
1. Select
Settings
from the Application Quick Launch Bar,
tap
Network
.
2. Turn Wi-Fi on by tapping the
Wi-Fi is off/Turn on Wi-Fi
.
3. The device automatically scans and list all local Wi-Fi Networks found. A
indicates secure networks that require login name/password to connect.
4. Tap the desired network to which you want to connect,
enter the
Network
Password
if applicable.
5. Tap
to close the
Settings
screen.
If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap
Other
and then enter the network name and key,
tap
Save
.
(Advanced): After saving the Wi-Fi network, you can change your network
settings by selecting
settings by selecting
Manual Setup
, and then follow the prompts.
The Wi-Fi icon on the top of screens indicates the status as follows:
= Connected
= Not connected, Wi-Fi turned ON
= Not connected and Wi-Fi turned OFF (power saver)
When the device goes into sleep mode, the Wi-Fi disconnects from the local
network, but will automatically reconnect when out of sleep mode (may take
up to 30 seconds to reconnect).
network, but will automatically reconnect when out of sleep mode (may take
up to 30 seconds to reconnect).
Connecting to Public Wi-Fi Hotspot
If you are connecting via a public Wi-Fi hotspot, it may be necessary to
immediately launch the browser and provide the hotspot login information prior to
having an active internet connection.
immediately launch the browser and provide the hotspot login information prior to
having an active internet connection.
1. Follow steps 1-5 above to select the hotspot Wi-Fi network.
2. Select
Web
from the Application Quick Launch Bar.
3. Enter the login information as required by the hotspot.