Toshiba e-STUDIO451c User Manual
e-STUDIO281c/351c/451c ADJUSTMENT
June 2005 © TOSHIBA TEC
3 - 80
3.13.2
Adjusting the angle of the jogging plate
(3) With reference to the rear jogging plate adjusted in step (2), adjust the front jogging plate in the
same manner.
(1) Without removing the processing tray unit,
loosen the 2 mounting screws of the rear jog-
ging plate.
ging plate.
Fig.3-71
(2) Place several sheets of A4/LT paper on the
processing tray, and adjust the rear jogging
plate. (At this time, adjust the gap between
the paper and the front end of the rear jog-
ging plate so that it is 0 mm to 0.5 mm.)
plate. (At this time, adjust the gap between
the paper and the front end of the rear jog-
ging plate so that it is 0 mm to 0.5 mm.)
Fig.3-72
Screw
Rear jogging plate
Paper
Butted
0 mm to 0.5 mm
Screw
Rear jogging
plate
plate