Toshiba e-STUDIO451c User Manual
e-STUDIO281c/351c/451c TROUBLESHOOTING
June 2005 © TOSHIBA TEC
5 - 134
5.4
Other errors
1) Operation cannot be performed (operation from the control panel is not successful) after installing
the option(s) such as Wireless LAN module, Scrambler board and/or Parallel board.
- Check if the optional board is installed properly.
- Check if the optional board is installed properly.
2) The connection to the Wireless LAN cannot be made even though it is set to “Enabled”.
- The connection state and settings of the Wireless LAN can be checked with [USER FUNC-
TIONS]
→ [ADMIN] → [WIRELESS LAN] → [SETTING CHECK].
Confirm the settings with the administrator.
* “NIC INITIALIZING” does not disappear at the time of the power being turned ON and it dis-
* “NIC INITIALIZING” does not disappear at the time of the power being turned ON and it dis-
appears after 6 minutes with the NIC initializing time-out. In this case, the connection to the
Wireless LAN did not succeed even though “NIC INITIALIZING” disappears.
Wireless LAN did not succeed even though “NIC INITIALIZING” disappears.
* The connection to the Wireless LAN cannot be made if the Access Point to be connected is
not found or security settings are not correct.
05/07