Toshiba e-STUDIO451c User Manual
June 2005 © TOSHIBA TEC
e-STUDIO281c/351c/451c FIRMWARE UPDATING
6 - 1
6
6. FIRMWARE UPDATING
In this equipment, following firmware is written on the ROM on each board.
When you want to update the firmware above or the equipment becomes inoperative status due to
some defectives of the firmware, updating the firmware is available by the following actions.
some defectives of the firmware, updating the firmware is available by the following actions.
• Updating with the download jig
• Updating with the USB Storage Device
Notes:
• Written firmware varies depending on the kinds of the boards provided as service parts. For
updating, only the minimum firmware is installed on the system control PC board, logic PC
board, and scanning section control PC board. No firmware is installed on the FAX board. The
latest version of the firmware at the delivery is written on the RADF control PC board and fin-
isher control PC board.
When any of above boards is replaced with a new one in the field, confirm the other firmware
version used with and then write the suitable version of the firmware.
board, and scanning section control PC board. No firmware is installed on the FAX board. The
latest version of the firmware at the delivery is written on the RADF control PC board and fin-
isher control PC board.
When any of above boards is replaced with a new one in the field, confirm the other firmware
version used with and then write the suitable version of the firmware.
• The firmware (master data) is not installed on the hard disk provided as a service part. When
the hard disk is replaced with a new one, confirm the other firmware version used with and
then write the suitable version of the firmware.
then write the suitable version of the firmware.
Firmware
Stored
Update method
Master data
(HDD program data, UI data)
Hard disk
USB Storage Device
System ROM
(System firmware, OS data, UI
data)
System control PC board
(SYS board)
USB Storage Device
*
Update with Download jig also
possible.
Engine ROM
(Machine firmware)
Logic PC board
(LGC board)
USB Storage Device
*
Update with Download jig also
possible.
Scanner ROM
(Scanner firmware)
Scanning section control PC
board
(SLG board)
USB Storage Device
*
Update with Download jig also
possible.
possible.
RADF ROM
(RADF firmware)
RADF control PC board
(MR-3018)
Download jig
Finisher ROM
(Finisher firmware)
Finisher control PC board
(MJ-1023/ MJ-1024)
Download jig
Finisher ROM
(Saddle stitcher firmware)
Finisher control PC board
(MJ-1024)
Download jig
FAX ROM
(FAX firmware)
FAX board
(GD-1200)
Download jig