JVC LCT2505-001A-H User Manual
7
Video input terminals
Input terminals on the monitor
Connecting cables
Output terminals on external
equipment
Notes
A
DVI
DVI-D
(HDCP) IN
(HDCP) IN
DVI cable
DVI output
Compatible with HDCP. When the picture is not displayed correctly, change the setting of
“DVI MODE” (see page 13).
“DVI MODE” (see page 13).
B
RGB
RGB IN
D-sub 15-pin cable
RGB output
C
VIDEO
VIDEO IN
BNC cable
Video output
Since the IN terminal and OUT terminal are loop-through terminals, the devices
connected to the OUT terminal should be correctly terminated. Otherwise, pictures
become abnormally bright or the display screen gets affected abnormally.
connected to the OUT terminal should be correctly terminated. Otherwise, pictures
become abnormally bright or the display screen gets affected abnormally.
Audio input terminals
Input terminals on the monitor
Connecting cables
Output terminals on external
equipment
Notes
D
AUDIO 1
AUDIO 1 IN
Audio cable
Audio output
(pin jack)
(pin jack)
Set “AUDIO ASSIGN” according to your connection (see page 13).
E
AUDIO 2
AUDIO 2 IN
Stereo mini plug cable
Audio output
(stereo mini jack)
(stereo mini jack)
Video output terminals
Output terminals on the
monitor
Connecting cables
Input terminals on external
equipment
Notes
F
RGB OUT
D-sub 15-pin cable
RGB input
Buffer output is used for RGB signal.
G
VIDEO OUT
BNC cable
Video input
Since the IN terminal and OUT terminal are loop-through terminals, the devices connected to the OUT
terminal should be correctly terminated. Otherwise, pictures become abnormally bright or the display
screen gets affected abnormally.
terminal should be correctly terminated. Otherwise, pictures become abnormally bright or the display
screen gets affected abnormally.
Audio output terminals
Output terminals on the
monitor
Connecting cables
Input terminals on external
equipment
Notes
H
AUDIO 1 OUT
Audio cable
Audio input
(pin jack)
(pin jack)
The IN terminal and OUT terminal are loop-through terminals.
I
AUDIO 2 OUT
Stereo mini plug cable
Audio input
(stereo mini jack)
(stereo mini jack)
J
EXT.
SPEAKER
OUT
SPEAKER
OUT
Speaker cord
Speaker terminal
When using the external speakers, set “SPEAKER SELECT” on the main menu to “EXT (external)” (see
page 13).
Use the speakers with the following specification:
Impedance: Between 6
page 13).
Use the speakers with the following specification:
Impedance: Between 6
Ω and 8 Ω
Power handling capacity: More than 7 W
• See page 8 and 9 for the available signal formats and the pin assignment of the DVI-D and D-sub
15-pin terminals.
GM-F470S_EN.indd 7
GM-F470S_EN.indd 7
08.12.26 10:35:39 AM
08.12.26 10:35:39 AM