JVC LCT2505-001A-H User Manual

Page of 32
9
Computer signals
•  When analog RGB signals are input, part of the picture may not be displayed or an unnecessary picture may appear in the following cases. If this happens, apply “AUTO ADJUST” or adjust “SIZE” and 
“POSITION” in the “SIZE SETTING” menu (see page 13).
– When a signal other than those listed below is input
– When the horizontal/vertical frequency of the signal is different though its resolution is the same as that of the signals listed below
– When the resolution of the signal output from the personal computer is different from that set for the personal computer’s display.
•  Any signal other than those listed below may not be displayed normally although it’s frequency is within the acceptable range.
•  Depending on the connected equipment, the monitor may not be compatible with G on sync signals.
•  When a preset mode signal is input, the signal format is displayed on the screen.
•  The sub window in the Dual Display mode (see page 11) is not compatible with G on sync signals.
√ : Acceptable / —: Not acceptable
Signal name
Screen resolution
Frequency
Input terminal
Notes
Horizontal
Vertical
Horizontal (kHz)
Vertical (Hz)
RGB
DVI-D
640*400@56Hz (VGA400/56)
640
400
24.823
56.42
640*400@70Hz (VGA400/70)
640
400
31.475
70.10
640*480@60Hz (VGA/60)
480
640
59.94
31.469
640*480@72Hz (VGA/72)
640
480
37.861
72.81
852*480@60Hz (WideVGA/60)
852
480
31.469
59.94
800*600@60Hz (SVGA/60)
800
600
37.879
60.32
1024*768@60Hz (XGA/60)
1024
768
48.363
60.00
1024*768@70Hz (XGA/70)
1024
768
56.476
70.07
1024*768@75Hz (XGA/75)
1024
768
60.023
75.03
1024*768@85Hz (XGA/85)
1024
768
68.667
85.00
1280*720@60Hz (WideXGA/60)
1280
720
44.820
60.00
Set “WIDE XGA” to “1280” on the main menu (see page 13). 
1280*768@60Hz (WideXGA/60)
1280
768
47.760
60.00
1360*768@60Hz (WideXGA/60)
1360
768
47.712
60.02
Set “WIDE XGA” to “1366” on the main menu (see page 13). 
1366*768@60Hz (WideXGA/60)
1366
768
48.363
60.00
1152*864@75Hz (XGA+/75)
1152
864
67.500
75.00
1280*1024@60Hz (SXGA/60)
1280
1024
63.981
60.02
Set “SXGA/SXGA+” to “SXGA” on the main menu (see page 13). 
1400*1050@60Hz (SXGA+/60-A)
1400
1050
63.981
60.02
Set “SXGA/SXGA+” to “SXGA+” on the main menu (see page 13). 
1400*1050@60Hz (SXGA+/60-B)
1400
1050
65.220
60.00
1600*1200@60Hz (UXGA/60)
1600
1200
75.000
60.00
GM-F470S_EN.indd   9
GM-F470S_EN.indd   9
08.12.26   10:35:41 AM
08.12.26   10:35:41 AM