Planar PX2211MW User Manual
5
Connecting the LCD Monitor and Base
When you open the box, place the monitor and put on
the desk first. (See fig. 1-1)
nConnect the LCD monitor and base.
oUsing your hand, lock the base and neck by screwing
the desk first. (See fig. 1-1)
nConnect the LCD monitor and base.
oUsing your hand, lock the base and neck by screwing
the thread clockwise.
pTo unlock the height adjustment feature of the stand,
locate the pin on the back of the stand column and
turn the pin knob counter-clockwise.
turn the pin knob counter-clockwise.
qMount the cable clip for cable management.
PIN is pull out with draging
hook up the cable clip
3
4
2
Figure 1-1
Optional Mounting Alternatives
Warning: The monitor stand base may forcefully extend and cause injury. Raise the monitor to its "Full Up"
position before removing the monitor stand.
position before removing the monitor stand.
Tilt, Swivel and Pivot Rotation
The LCD Monitor is designed to have a tilt
range of -5°to +20°, a swivel range of -35°to
+35°, and a 90° pivot rotation. (See fig. 1-2)
range of -5°to +20°, a swivel range of -35°to
+35°, and a 90° pivot rotation. (See fig. 1-2)
+20
-5
35
90
UP
TOP
35
Figure 1-2
Warning
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will
result in damaging the Monitor and Monitor stand.
result in damaging the Monitor and Monitor stand.
Detaching LCD Monitor from Its Stand
Unscrew screws n the swivel base support column and
pull downo the hinge to release.
pCable management ring.
pull downo the hinge to release.
pCable management ring.
3
2
1
Figure 1-3