NEC PlasmaSync 3300 User Manual
No.4
No.5
No.6
No.7
No.8
Pin numbers 4 and 6 are not used. Set the six pins to the OFF position except
Nos. 5 and 8 pin during normal operation.
Pins No. 1, 2 and 3 (POWER ON MODE SET)
Sets the monitor to default to any one of its inputs each time the monitor is
turned on. See table on the above.
This function does not work when the pin No. 1 is set to the OFF position.
The last selected input will be stored.
Pin No. 5 (ON SCREEN DISPLAY )
When this switch is set to ON, the On Screen Manager can be accessed.
Pin No. 7 (EXT. CONTROL)
When this switch is set to ON, the External Control function is activated. See
page 41 for pin assignments.
Pin No. 8 (WIRELESS REMOTE ON/OFF)
When this switch is set to ON, the monitor can be controlled by the wireless
remote control unit.
Functions of DIP SW
Functions and Settings of DIP SW 1
This DIP switch sets various conditions of the monitor.
No.2
---
OFF
ON
OFF
ON
No.1
OFF
ON
ON
ON
ON
No.3
---
OFF
OFF
ON
ON
MODE
DEFEAT
VIDEO 1
VIDEO 2
RGB
1
RGB
2
POWER ON MODE SET
DIP SWITCH
No.1
No.2
No.3
Not Used
ON : On Screen display ON
OFF : On Screen display OFF
Not Used
ON : External control ON
OFF : External control OFF
ON : Wireless remote control ON
OFF : Wireless remote control OFF
18
17