Sony LIB-81 User Manual

Page of 102
2
INFORMATION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to 
operate this equipment.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Caution
The mains plug on this equipment must be used to disconnect mains power.
Please ensure that the socket outlet is installed near the equipment and shall be easily accessible.
Notice
Use the power cord set approved by the appropriate testing organization for the specific countries where this unit is to be 
used.
WARNING
Before performing any installation or maintenance procedures, be sure that the library power switch is in the off position 
and that the power cord is disconnected from the library.
WARNING
The standalone library weighs around 13.5 kg. At least 2 people are needed to move or lift the library. Make sure you install 
the rack-mount library in the lowest possible location in the rack. For best results, use a rack with extension support legs.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device 
pursuant to Subpart B of Part 15 of FCC Rules.
If you have any questions about this product, please contact the Sony Support Center written on the warranty card.
Declaration of Conformity
Trade Name:
SONY
Model No.:
LIB-81
Responsible Party:
Sony Electronics Inc.
Address:
16530 Via Esprillo San Diego, CA. 92127 U.S.A.
Telephone No.:
858-942-2230
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.