Sony BW-RU101 User Manual
8
Part Location and Function
C
In
tr
od
u
u
c
ti
on
BW-RS101 Rear Panel
A Function switches
Use these switches to set the SCSI ID and unit functions. See “BW-RS101
Function Settings” on page 15 for details
Use these switches to set the SCSI ID and unit functions. See “BW-RS101
Function Settings” on page 15 for details
B SCSI connectors
Connect SCSI cables (sold separately) to these connectors to link the host
computer and/or other SCSI devices.
Connect SCSI cables (sold separately) to these connectors to link the host
computer and/or other SCSI devices.
C Air duct
Air is sucked through the duct for cooling the unit.
Air is sucked through the duct for cooling the unit.
Note
Make sure that you do not block the air duct or impede the air flow.
D F.GND (ground terminal)
Connect the ground terminals of other devices to the unit's frame ground.
Connect the ground terminals of other devices to the unit's frame ground.
E AC IN connector
Connect the supplied AC power cord to this connector.
Connect the supplied AC power cord to this connector.
F Power switch
Pressing the “ ? ” side turns on the power. To turn off the power, press the “a”
side.
Pressing the “ ? ” side turns on the power. To turn off the power, press the “a”
side.
1
2
3
4
5 6