EVGA 128-P2-KN01 User Manual
8
To set the link speed:
1. Right-click on the Killer Xeno tray icon.
2. Select Xeno Configuration.
1. Right-click on the Killer Xeno tray icon.
2. Select Xeno Configuration.
3. Select the Main tab.
4. Under Xeno NIC, open the Mode
drop-down menu and select Normal.
Note: The Killer Xeno must be in Normal mode to set the link speed.
drop-down menu and select Normal.
Note: The Killer Xeno must be in Normal mode to set the link speed.
5. Under General, open the Link Speed drop-down menu and select the speed for your network connection.
6. Click OK.
6. Click OK.
Setting Duplex Mode
The following table shows the available duplex modes.
The duplex mode should be changed from the default setting only if the Killer Xeno is connected to an
older switch or router (for example, a switch or router manufactured in 1998 or earlier).
The duplex mode should be changed from the default setting only if the Killer Xeno is connected to an
older switch or router (for example, a switch or router manufactured in 1998 or earlier).
Mode
Description
Full Duplex
Default setting
This is the recommended setting for connecting all recent
consumer home switches, routers, or gateways.
This is the recommended setting for connecting all recent
consumer home switches, routers, or gateways.
Half Duplex
Restricts the connection to half duplex mode, and limits
overall performance for your Killer Xeno.
This setting should be used only if you are connecting to
legacy networking equipment (manufactured in 1998 or
earlier).
overall performance for your Killer Xeno.
This setting should be used only if you are connecting to
legacy networking equipment (manufactured in 1998 or
earlier).
7
Setting Link Speed
Link speed determines how fast the Killer Xeno connects to the local network or Internet. In most cases,
your local network will be much faster than your Internet connection.
your local network will be much faster than your Internet connection.
The following table shows the available speeds and requirements for each.
Speed
Description
Requirement
Auto
Auto-negotiates the fastest
available speed based upon
the configuration of your
local network
available speed based upon
the configuration of your
local network
None
(recommended setting)
(recommended setting)
10 Mb
Configures the Killer Xeno
for 10 Mb connections only
for 10 Mb connections only
Your local network
connection must support 10
Mb Ethernet networking
connections
connection must support 10
Mb Ethernet networking
connections
100 Mb
Configures the Killer Xeno
for 100 Mb connections
Note that speeds up to
100 Mb are also supported
for 100 Mb connections
Note that speeds up to
100 Mb are also supported
Your local network
connection must support 100
Mb Ethernet networking
connections
connection must support 100
Mb Ethernet networking
connections
1000 Mb
Configures the Killer Xeno
for 1000 Mb (1 Gigabit)
connections
Note that speeds up to
1000 Mb (are also
supported
for 1000 Mb (1 Gigabit)
connections
Note that speeds up to
1000 Mb (are also
supported
Your local network
connection must support 1
Gigabit (1000 Mb) Ethernet
networking connections
connection must support 1
Gigabit (1000 Mb) Ethernet
networking connections