Quantum LTO-2 User Manual

Chapter 2  Installation and Quick Start

Installing an Internal LTO-2 Half-Height Tape Drive

LTO-2 Half-Height Tape Drive User’s Guide

13

2

The internal LTO-2 Half-Height Tape Drive has an Ultra3 SCSI interface, 

terminated by an LVD SCSI connector. Use the following procedure to 

connect a SCSI cable to this connector.

Turn off all power to the drive and the computer.

Attach the SCSI interface cable to the 68-pin SCSI interface connector 

on the back of the drive (see 

Figure 5  Rear View of 
the Internal LTO-2 
Half-Height Tape Drive 

Install an LVD drive only in an LVD environment. 

Plugging an LVD drive into an HVD bus makes the entire 

bus non-functional and may permanently damage the 

drive or other SCSI devices on the bus.

SCSI Jumper Block

Pin 1

Library Interface Connector

SCSI Connector

Power Connector