Gigabyte GA-8IDML User Manual

GA-8IDML Series Motherboard

UART Mode Select

(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)

ASKIR

Set onboard I/O chip UART to ASKIR Mode.

IrDA

Set onboard I/O chip UART to IrDA Mode.

SCR

Set onboard I/O chip UART to SCR Mode.

Normal

Set onboard I/O chip UART to Normal Mode. (Default Value)

RxD, TxD Active

Hi, Hi

Set RxD,TxD Active to Hi, Hi.

Hi, Lo

Set RxD,TxD Active to Hi, Lo. (Default Value)

Lo, Hi

Set RxD,TxD Active to Lo, Hi.

Lo, Lo

Set RxD,TxD Active to Lo, Lo.

IR Transmis sion Delay

Enabled

Enabled IR Transmission delay. (Default Value)

Disabled

Enabled IR Transmission delay.

UR2 Dupl ex Mode

Half

IR Function Duplex Half. (Default Value)

Full

IR Function Duplex Full.

Onboard Ser ial Port 2

Auto

BIOS will automatically setup the port 2 address.

3F8/IRQ4

Enable onboard Serial port 2 and address is 3F8.

2F8/IRQ3

Enable onboard Serial port 2 and address is 2F8. (Default Value)

3E8/IRQ4

Enable onboard Serial port 2 and address is 3E8.

2E8/IRQ3

Enable onboard Serial port 2 and address is 2E8.

Disabled

Disable onboard Serial port 2.