Gigabyte GA-8IDML User Manual

Page of 67
BIOS Setup
39
Parallel Port Mode
SPP
Using Parallel  port as Standard Parallel Port. (Default Value)
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
Parall el Port EPP Type
EPP 1.9
EPP Version is 1.9. (Default value)
EPP 1.7
EPP Version is 1.7.
AC Back  Function
Memory
System power on depends on the status before AC lost.
Soft-Off
Always in Off state when AC back. (Default value)
Full-On
Always power on the system when AC back.
OnBoard Par allel port
378/IRQ7
Enable On Board LPT port and address is 378.(Default Value)
278/IRQ5
Enable On Board LPT port and address is 278.
3BC/IRQ7 Enable On Board LPT port and address is 3BC.
Use IR Pins
IR-Rx2Tx2
Enable On Board LPT port and address is 378.(Default Value)
RxD2,TxD2 Enable On Board LPT port and address is 278.