GE LTC MAP User Manual

This Section includes procedures for installation, configuration, wiring, 

setting up communications, and initial start-up of the LTC-MAP 2130 

Monitor. 

The LTC-MAP 2130 is enclosed in a weatherproof stainless steel box that 

can be mounted indoors or outdoors.  When selecting a mounting location 

for the monitor, verify that: 

• 

The mounting surface is able to support a minimum of 25 pounds (11.3 

kg). 

• 

The mounting surface allows ample space for mounting the stainless 

steel box and allows for a 12-inch (305 mm) door clearance (see Figure 

3-1). 

• 

Sensors are located nearby to minimize cable length. 

• 

Wiring and cables can access the monitor gland plate. 

• 

The face panel display is at a readable level. 

• 

An operating temperature of 0 ºC to +60 ºC  (+32 ºF to +140 ºF) can be 

maintained at the monitor location.  

NOTE:  With the heater option installed, an operating temperature of  

-40 ºC to +º60 C  (-40 ºF to +140 ºF) must be maintained at the 

monitor location. 

CAUTION: Select a mounting location that assures an operating 

temperature of 0 ºC to +60 ºC (+32 ºF to +140 ºF), otherwise system operation 

could be interrupted.