Motorola MVME3100 User Manual
Chapter 1 Hardware Preparation and Installation
MVME3100 Installation and Use (V3100A/IH1)
9
To remove the board from the chassis, press the red locking tabs (IEEE handles only) and
reverse the procedure.
reverse the procedure.
Connection to Peripherals
When the MVME3100 is installed in a chassis, you are ready to connect peripherals and apply
power to the board.
power to the board.
shows the locations of the various connectors while
and
list them for you. Refer to
for the pin assignments of the
connectors listed below.
Table 1-7. MVME3100 Connectors
Connector
Function
J4
PMC expansion connector
J11, J12, J13, J14
PCI mezzanine card (PMC) slot 1 connector
J21, J22, J23
PCI mezzanine card (PMC) slot 2 connector
J24
Boundary scan header
J25
COP header
J27
USB connector
J28
Front panel sATA connector
J29
Planar sATA connector
J30
Planar sATA power connector
J41B
10/100/1000Mb/s Ethernet connector
J41A
COM port connector
P1, P2
VME backplane connectors
Table 1-8. MVME721 Rear Transition Module Connectors
Connector
Function
J1A, J1B, J1C, J1D
COM port connectors
J2A
10/100/1000Mb/s Ethernet connector
J2B
10/100Mb/s Ethernet connector
J10
PIM power/ground
J14
PIM I/O
P2
VME backplane connector