Motorola MVME3100 User Manual
A
MVME3100 Installation and Use (V3100A/IH1)
65
A
Specifications
Power Requirements
In its standard configuration, the MVME3100 requires +5V for operation. On-board converters supply
the processor core voltage, +3.3V, +1.8V, and +2.5V. For any installed PMC card that requires +12V or
-12V, these voltages must be supplied by the chassis.
the processor core voltage, +3.3V, +1.8V, and +2.5V. For any installed PMC card that requires +12V or
-12V, these voltages must be supplied by the chassis.
Supply Current Requirements
provides an estimate of the typical and maximum current required from each of the input
supply voltages.
Note
In a 3-row chassis, PMC current should be limited to 32 watts (total of both PMC slots). In a 5-row
chassis, the PMC sites can support a total of 50 watts.
Environmental Specifications
lists the environmental specifications, along with the board dimensions.
Table A-1. Power Requirements
Model
Power
MVME3100
No PMCs or peripherals attached
No PMCs or peripherals attached
Typical: 4.5A (22.5W) @ +5V.0
Maximum: 5.6A (28W) @ +5.0V
Maximum: 5.6A (28W) @ +5.0V
Table A-2. MVME3100 Specifications
Characteristics
Specifications
Operating Temperature
0° to +55° C or (inlet air temperature with forced air
cooling
cooling
Storage Temperature
–40° to +85° C
Relative Humidity
Operating: 5% to 90% non-condensing
Non-operating: 5% to 90% non-condensing
Non-operating: 5% to 90% non-condensing