Motorola MVME187 User Manual
Setting Environment to Bug/Operating System
A-11
A
Master Enable #1 [Y/N]
Y
Yes, Setup and enable the Master
Address Decoder #1.
Address Decoder #1.
Master Starting Address #1
02000000
Base address of the VMEbus resource
that is accessible from the local bus.
Default is the end of calculated local
memory.
that is accessible from the local bus.
Default is the end of calculated local
memory.
Master Ending Address #1
EFFFFFFF
Ending address of the VMEbus
resource that is accessible from the
local bus. Default is the end of
calculated memory.
resource that is accessible from the
local bus. Default is the end of
calculated memory.
Master Control #1
0D
Works the same as Slave Control #1.
Default is $0D.
Default is $0D.
Master Enable #2 [Y/N]
N
Do not set up and enable the Master
Address Decoder #2.
Address Decoder #2.
Master Starting Address #2
00000000
Base address of the VMEbus resource
that is accessible from the local bus.
Default is $0.
that is accessible from the local bus.
Default is $0.
Master Ending Address #2
00000000
Ending address of the VMEbus
resource that is accessible from the
local bus. Default is $0.
resource that is accessible from the
local bus. Default is $0.
Master Control #2
00
Works the same as Slave Control #1.
Default is $00.
Default is $00.
Master Enable #3 [Y/N]
N
Do not set up and enable the Master
Address Decoder #3.
Address Decoder #3.
Master Starting Address #3
00000000
Base address of the VMEbus resource
that is accessible from the local bus.
Default is $0.
that is accessible from the local bus.
Default is $0.
Master Ending Address #3
00000000
Ending address of the VMEbus
resource that is accessible from the
local bus. Default is $0.
resource that is accessible from the
local bus. Default is $0.
Master Control #3
00
Works the same as Slave Control #1.
Default is $00.
Default is $00.
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options
Default
Meaning of Default