Motorola PrPMC800/800ET Processor PMC Module User Manual

The PrPMC800/800ET is an add-on module meant to be used in conjunction with standard 
VME, CompactPCI, or ATX baseboard applications. As such, it is the responsibility of the OEM 
to meet the regulatory guidelines as determined by their application.

The PrPMC800/800ET has been tested in conjunction with a standard ECC baseboard and 
chassis for CE certification and meets the requirements for EN55022 Class A equipment. 
Compliance was achieved under the following conditions:

❏

Shielded cables on all external I/O ports.

❏

Cable shields connected to earth ground via metal shell connectors bonded to a 

conductive module front panel.

❏

Conductive chassis rails connected to earth ground. This provides the path for 

connecting shields to earth ground.

❏

Front panel screws properly tightened.

For minimum RF emissions, it is essential that the conditions above be implemented. Failure to 
do so could compromise the EMC compliance of the equipment containing the module.

Temperature

Operating
Nonoperating

−40° C to 70°C (32° F to 148° F)

−40° C to 70°C (32° F to 148° F)

Altitude

Operating
Nonoperating

4,000 meters (13,123 feet)
15,000 meters (49,212 feet)

Relative Humidity

Operating
Nonoperating

5% to 85% (noncondensing)
5% to 95% (noncondensing

Vibration

Operating
Nonoperating

1.0 G sine sweep, 5.0 to 100 Hz, 25 octaves/min
0.5 G sine sweep;5-50 Hz; 0.1 octaves/min
3.0 G sine sweep; 50-500 Hz;0.25 octaves/min