Buffalo Technology TS-RXL User Manual
TeraStation User Manual
147
Status
Displays the current status when changing the settings or formatting drives.
Examples of LCD
Meaning
HDx Warning
I11
Bad Sectors
Bad sectors in Xth hard drive may reach the dangerous zone. Replace Xth hard drive.
Operation Mode
I12
DEGRADE MODE
RAID Degrade mode is running.
RAID
I13
ARRAYx Formatting
Formatting Xth RAID Array.
RAID
I14
ARRAYx Checking
Checking Xth RAID Array.
RAID
I15
ARRAYx Scanning
Investigating the error status occurred in Xth RAID array.
* During the investigation, transfer speed will be degraded.
RAID
I16
ARRAYx Creating
Creating Xth RAID Array.
RAID
I17
ARRAYx Resyncing
Resyncing Xth RAID Array.
* While resyncing, the transfer speed will be degraded.
RAID
I18
ARRAYx Rebuilding
Rebuilding Xth RAID Array.
* While rebuilding, the transfer speed will be degraded.
RAID
I19
ARRAYx 0 Filling
Deleting data completely by filling 0 into Xth RAID array.
DISK
I20
DISKx Formatting
Formatting Xth hard drive.
DISK
I21
DISKx Checking
Checking Xth hard disk.
DISK
I22
DISKx 0 Filling
Deleting data in Xth hard drive.
SYSTEM
I23
Initializing
Initializing the system.
Network
I24
Setting Config
Setting the network such as obtaining an IP address.
SYSTEM
I25
F/WUPDATING
Updating the TeraStation’s firmware.
* Do not turn off the TeraStation while updating.
Web Setting
I26
Initializing
Initializing web configuration.
USB Diskx
I27
Checking
Checking Xth USB hard disk.
USB Diskx
I28
Formatting
Formatting Xth USB hard drive.
Press FuncSW
I31
New Diskx ready
This message is displayed when restructure RAID by pressing a function switch after
replacing the hard drive.
Set From Web
I32
New Diskx ready
This is displayed when RAID needs to be restructured on the Web Admin interface or
formatted after replacing the hard drive.
* If you are using TS-RXL Series, LCD display with the height of 1 line contains 2 line’s worth of information. You can scroll horizontally
to view it.