Belkin PM11-EC/RAMA User Manual

Award BIOS Setup Utility

3.1.6 PnP/PCI Configurations

This section shows how to configure the PCI bus system. It covers

some very technical items and it is strongly recommended that only

experienced users should make any changes to the default settings.

PNP OS Installed

The default setting is No. The BIOS will detect the Plug and Play

devices for some compatible resources.

Reset Configuration Data

Enabled The BIOS will reset the Extended System Configuration

Data (ESCD) once automatically. It will then recreate a

new set of configuration data.

Disabled The BIOS will not reset the configuration data.

Resources Controlled By

The Award Plug and Play BIOS has the capability to automatically

configure all of the boot and Plug and Play compatible devices.

Auto(ESCD) The system will automatically detect the settings for

you.

Manual

Choose the specific IRQ resources in the IRQ

Resources field.

The settings on the screen are for reference only. Your version may not be

identical to this one.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Installed

Reset Configuration Data

Resources Controlled By

IRQ Resources

PCI/VGA Palette Snoop

Assign IRQ For VGA

Assign IRQ For USB

PCI Slot 1 Use IRQ

PCI Slot 2 Use IRQ

PCI Slot 3 Use IRQ

Disabled

Auto(ESCD)

Press Enter

Disabled

Enabled

Auto

Item Help

Menu Level

Default is Disabled.

Select Enabled to

reset Extended System

Configuration Data

(ESCD) when you exit

Setup if you have

installed a new add-on

and the system

reconfiguration has

caused such a serious

conflict that the OS

cannot boot.

↑↓→←

Move

F6:Fail-Safe Defaults

F7:Optimized Defaults

F1:General Help

Enter:Select

F5:Previous Values

+/-/PU/PD:Value F10:Save ESC:Exit