Intel cpb4612 User Manual

Setup Screen

SYSTEM CONFIGURATION SUMMARY

Diversified Technology, Inc – cPB4612

CPU Type :Intel(R) Pentium(R) M processor 1700MHz

CPU Speed : 1.70GHz Hard Disk 0: Not Detected

L2Cache : 1024KB Hard Disk 1: Not Detected

Base RAM : 639K Hard Disk 2: Not Detected

Extended RAM: 480MB Hard Disk 3: Not Detected

Video RAM : 32MB COM Ports : 3F8 2F8 3E8

PCB Revision: 1.0 BIOS Date : 03/31/04

Memory Mode : PC2100 (266MHz) DDR SDRAM with ECC

PMC Slot 1 : PCI-X 66 MHz

PMC Slot 2 : PCI 33 MHz

USB Devices : 1 Keyboard, 1 Mouse, 1 Hub, 1 Drive

SYSTEM SUMMARY

SYSTEM SETUP

HARD DISK SETUP

BOOT ORDER

PERIPHERALS

USB CONFIG

MISC. CONFIG

EVENT LOGGING

SECURITY/VIRUS

EXIT

↑↓ Select Screen Enter Go to Sub Screen

F1 General Help Esc Exit

2.8 Operating

System

Installation

For more detailed information about your operating system, refer to the documentation provided by the
operating system vendor.

1. Install peripheral devices. CompactPCI* devices are automatically configured by the BIOS during

the boot sequence.

2. Most operating systems require initial installation on a hard drive from a floppy or CD-ROM drive.

These devices should be configured, installed, and tested with the supplied drivers before
attempting to load the new operating system.

3. Read the release notes and installation documentation provided by the operating system vendor.

Be sure to read any README files or documents provided on the distribution disks, as these
typically note documentation discrepancies or compatibility problems.

4. Select the appropriate boot device order in the SETUP boot menu depending on the OS

installation media used. For example, if the OS includes a bootable installation floppy, select
Removable Media

as the first boot device and reboot the system with the installation floppy

installed in the floppy drive. (Note that if the installation requires a non-bootable CD-ROM, it is
necessary to boot an OS with the proper CD-ROM drivers in order to access the CD-ROM drive).