Lucent Technologies partner voice messaging card User Manual

When the PARTNER ACS is installed, it uses factory settings that reflect the

most common usage of the equipment. You can change these settings as
required to customize them for the business.

You can program the communications system from extension 10 or extension

11. You may find it more convenient to program from extension 11. This

capability allows the receptionist to continue handling calls at extension 10
while you program.

System Programming changes settings for the system as a whole, or for
individual lines or extensions. (Refer to the  Programming and Use  guide for
the PARTNER ACS system for more information about System Programming
options.)

■

■

Assign the PARTNER Voice Messaging PC Card's virtual extensions 78 and
79 to PARTNER ACS Hunt Group 7 (ICOM 777) used for voice mail
systems.

Assign extension 10 or extension 11 as the destination extension for
Transfer Return calls from Hunt Group 7 (ICOM 777). This ensures that
when a caller chooses to transfer to another extension before during or
after leaving a message in a subscriber mailbox and the call is
unanswered, the transferred call will return to the designated receptionist's
extension where it rings until it is answered.

Refer to the communications system's System Planner when you are changing
system settings, and be sure to record any changes you make. The following

forms from the System Planner contain information about PARTNER Voice
Messaging:

■

Form A: System Configuration.  Contains basic information about the
system. This includes the line number and type of voice messaging service
required for each line.