Lucent Technologies partner voice messaging card User Manual

During System Programming, the normal functions of several buttons on the
phone at extension 10 (or 11 if available) change. For example, left [ 

 ]

becomes [ 

 ], which is the button used to enter programming mode.

To identify these buttons while programming, place the appropriate
programming overlay provided with the system over the dialpad of the phone
at extension 10 or 11.

Use the following special buttons while programming:

■

■

■

■

■

■

■

■

[ 

 ] 

and [ 

 ] cycle forward and backward through the

programming procedures.

[ 

 ] and [ 

 ] cycle forward and backward through a procedure's

parameters. A parameter is typically an outside line, an extension, or a
telephone list entry.

[ 

 ] and [ 

 ] cycle forward and backward through the valid list

entries. These buttons work only for fixed data, such as a line or extension
number. They do not work for variable data such as date, time, password,
telephone numbers, or doorphone assignments.

[ 

 ] returns the current setting to the factory setting.

[ 

 ] ends an entry of variable length, such as a telephone number in an

Allowed Phone Number List.

[ 

 ] starts the System Programming process.

[ 

 ] starts the Centralized Telephone Programming process (that is,

customizing individual telephones from extension 10, or 11 if available).

[ 

 ], when followed by [ 

 ] [ 

 ], enters or exits programming mode.

To enter programming mode:

1.

2.

3.

At extension 10 or 11, make sure the programming overlay is in place

over the system phone's dialpad.

Press [ 

 ] [ 

 ] [ 

 ].

Press [ 

 ] [ 

 ].