Promise Technology M310p User Manual
Chapter 4: Management with WebPAM PROe
61
Network Management
Network Management deals with network connections to the VTrak’s
Management Port.
Management Port.
Management Port
The Network Management–Ethernet tab enables you to see the current
Management Port settings on the Controller, including:
Management Port settings on the Controller, including:
•
Controller ID
•
Maximum number of ports supported
•
Number of ports present
•
Number of failed ports
•
Port ID
•
Port status (enabled or disabled)
•
Link status (up or down)
•
IP type
•
DHCP status (enabled or disabled)
•
Primary IP address
•
Primary subnet mask
•
Default gateway IP address
•
Automatic Domain Name Service (DNS) through DHCP (yes or no)
•
Primary DNS server IP address
•
Primary MAC address
•
Maximum speed supported by this connection
To make changes to the Management Port settings:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Administrative Tools
icon.
3.
Click on the Network Management
icon.
4.
Click the Port 1 link in Management View.
5.
To enable DHCP, check the DHCP box.
When DHCP is NOT enabled, enter:
•
Primary IP address
•
Primary subnet mask
•
Default gateway IP address
•
Enter a primary DNS server IP address.
6.
Click the Submit button.