Promise Technology M310p User Manual
Chapter 4: Management with WebPAM PROe
63
SCSI Target Information
1.
Click the Subsystem
icon in Tree View.
2.
Click the Administrative Tools
icon.
3.
Click on the SCSI Management
icon.
The Channel tab displays SCSI Channel Information:
4.
Click on the Target tab.
The Target tab displays information about the 16 SCSI targets on each of the
two SCSI channels:
two SCSI channels:
•
Status – Enabled or Disabled
•
Negotiated Transfer Rate – Data Transfer Rate in MB/s
•
Bus Width – Narrow or Wide
A value of N/A under Transfer Rate or Bus Width appears when the Target is
disabled. To enable a SCSI Target, see “SCSI Channel Settings” on page 62.
disabled. To enable a SCSI Target, see “SCSI Channel Settings” on page 62.
Storage Services
The Storage Services–LUN Map tab displays the Target IDs and LUNs assigned
to each logical drive.
to each logical drive.
For SCSI, LUN Mapping is the process of applying a LUN Map so that each
channel can access the logical drive (target).
channel can access the logical drive (target).
View LUN Map
To view the current LUN Map:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Administrative Tools
icon.
3.
Click on the Storage Services
icon.
4.
Click the LUN Map tab in Management View.
Cautions
•
Turn off termination only when the VTrak is NOT the last
device in the SCSI chain.
device in the SCSI chain.
•
Internal termination only works on the “Out” SCSI connectors.