Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-243
CARD-MEM (Memory Card)
10
CARD-MEM (Memory Card)
A memory card contains a set of flash EPROM memory devices. The data can be
stored in a memory card and can remain nonvolatile, even when the power is off.
The memory card is installed into the TN777B NETCON circuit pack to save the
translations, announcements, and core dumps. During the system reboot or a
system power down condition, the in-core system maintenance hardware error
logs are temporarily saved in the memory card before the system goes down.
When the system is restarted, the error logs file is read back from the memory
card.
stored in a memory card and can remain nonvolatile, even when the power is off.
The memory card is installed into the TN777B NETCON circuit pack to save the
translations, announcements, and core dumps. During the system reboot or a
system power down condition, the in-core system maintenance hardware error
logs are temporarily saved in the memory card before the system goes down.
When the system is restarted, the error logs file is read back from the memory
card.
The Hard Patch feature also uses the memory card as temporary storage when
LMM applies an update file to the in-core system software. The system software
is stored in the "flash" section of main memory. The memory card used for saving
translations doesn’t contain a copy of the system software.
LMM applies an update file to the in-core system software. The system software
is stored in the "flash" section of main memory. The memory card used for saving
translations doesn’t contain a copy of the system software.
The recommended size of a memory card for each configuration is described in
the following table.
the following table.
Customers can have either 1 MB, 4 MB, or 10 MB memory cards for the normal
operations. 10 MB memory cards are also used for maintenance and software
upgrades. The software upgrade memory card cannot be used for saving
translations.
operations. 10 MB memory cards are also used for maintenance and software
upgrades. The software upgrade memory card cannot be used for saving
translations.
Always use 4 MB memory Cards, 10 MB memory cards should only be used
when a 4MB card gives an error in the CAP-MEM Maintenance Object Test
#1014 (Memory Card Capacity Test).
when a 4MB card gives an error in the CAP-MEM Maintenance Object Test
#1014 (Memory Card Capacity Test).
1.
The "MAJOR" alarm occurs only at power-up time or on a Reset System 3, 4, or 5
when the switch cannot load all translations from the memory card.
when the switch cannot load all translations from the memory card.
MO Name (in
Alarm Log)
Alarm Level
Initial Command to Run
Full Name of MO
CARD-MEM
MAJOR
1
Memory Card
CARD-MEM
MINOR
test card-mem long
Memory Card
CARD-MEM
WARNING
test card-mem sh
Memory Card
Memory Card Size
Usage
File Names
1 Megabyte
Without Announcements
translation
4 Megabyte
With Announcements
translation announcements
10 Megabyte
With Announcements
translation announcements
10 Megabyte
Maintenance
translation announcements core_dump
10 Megabyte
System Upgrade
system_software