Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-40
busyout tdm
8
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
following message will be displayed:
All maintenance resources busy; try again later
Output
For the following output example, assume that the command that was entered is
"busyout station 1002."
"busyout station 1002."
Feature Interactions
None.
busyout tdm
This command will busyout a TDM bus on the PPN or any EPN. The TDM bus with
system tones can not be busied out.
system tones can not be busied out.
Synopsis
busyout tdm pn number bus
Port
The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being busied out.
object that is being busied out.
Maintenance Name
The type of maintenance object that is being busied out.
Alt. Name
The alternate means of identifying the maintenance object. This
field contains the extension.
field contains the extension.
Result
The results of trying to busyout the station - "PASS," "FAIL,"
"ABORT."
"ABORT."
Error Code
A numerical description of why the command aborted or failed.
busyout station 1002 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C1102 DIG-LINE PASS
01C1102 DIG-LINE PASS
Command successfully completed