Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-90
disable mst
8
Examples
disable mst
Description
The disable mst command will disable the message trace. If the trace was not
already disabled for some other reason, a GAP marker will be inserted into the
trace. The contents are then frozen, and can be viewed via the "list mst"
command.
already disabled for some other reason, a GAP marker will be inserted into the
trace. The contents are then frozen, and can be viewed via the "list mst"
command.
The command should be executed when done using the trace facility. If left
enabled, the trace will continue to use CPU time until the run time limit expires.
enabled, the trace will continue to use CPU time until the run time limit expires.
Executing a disable mst command when the trace is already disabled will have
no effect, and will indicate that it worked.
no effect, and will indicate that it worked.
Defaults
None.
Parameters
None.
Help Messages
If the user presses
HELP
after entering "disable mst," the following message
displays:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
Output
After the user has entered the command the following message appears at the
bottom of the screen:
bottom of the screen:
Command successfully completed