Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-91
disable suspend-alm-orig
8
Feature Interactions
None.
disable suspend-alm-orig
This command disables one or more active Suspend Alarm Origination entries.
Synopsis
disable suspend-alm-orig (board location).
Examples
disable suspend-alm-orig 1C03
disable suspend-alm-orig 1E07
disable suspend-alm-orig 1E07
Description
This command disables one or more active Suspend Alarm Origination entries
from the Suspend Alarm Origination table. This command disables all entries
(boards and ports) matching the specified physical board location.
from the Suspend Alarm Origination table. This command disables all entries
(boards and ports) matching the specified physical board location.
NOTE:
A port entry cannot be disabled with this command. Allowing for different
ways to disable one or more entries greatly increases the complexity of
updating and displaying the Suspend Alarm Origination table.
A port entry cannot be disabled with this command. Allowing for different
ways to disable one or more entries greatly increases the complexity of
updating and displaying the Suspend Alarm Origination table.
Defaults
None.
Parameter
Help Messages
N is the maximum number of cabinets in the switch:
Enter board location:[cabinet(1-N)];
carrier(A-E);slot(0-20)
board
location
location
This parameter specifies the physical board location of the hardware
component that has been replaced or corrected. A port location is not
supported because of it complexities.
component that has been replaced or corrected. A port location is not
supported because of it complexities.