Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-624
test network-control
8
In the following output example, the command "test modem-pool 1/3" was
entered.
entered.
Feature Interactions
None.
test network-control
This command will test a network control board.
Synopsis
test network-control location
[ short | long ][ repeat number | clear ] schedule
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
test network-control
test network-control a l
test network-control b sh r 2
test network-control b l r 25
test network-control a
test network-control a c
test network-control a l
test network-control b sh r 2
test network-control b l r 25
test network-control a
test network-control a c
Description
The test network-control command performs hardware diagnostic tests on a
technician specified network control circuit pack.
technician specified network control circuit pack.
test modem-pool 1/3 short SPE B
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C0701 MODEM-PT 98 PASS
01C0701 MODEM-PT 99 PASS
01C0701 MODEM-PT 98 PASS
01C0701 MODEM-PT 99 PASS
Command Successfully Completed