Lucent Technologies R5SI User Manual
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-660
test spe-standby
8
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
test spe-standby long
test spe-standby l
test spe-standby s r 2
test spe-standby c
test spe-standby l
test spe-standby s r 2
test spe-standby c
Description
The test spe-standby command performs hardware diagnostic tests on the
standby Switch Processing Element (SPE) in a duplex SPE system. This
command tests all MOs in the standby MO. The STBY-SPE MO itself does not
have any defined tests. Instead tests are run on the following MOs when the
standby Switch Processing Element (SPE) in a duplex SPE system. This
command tests all MOs in the standby MO. The STBY-SPE MO itself does not
have any defined tests. Instead tests are run on the following MOs when the
test
spe-standby
command is run. Refer to the sections for these MOs for more
details. This command is only for a High or Critical Reliability System. This
command will run the following tests on the standby SPE:
command will run the following tests on the standby SPE:
9. MEMORY
10. SHDW-LNK
11. SHDW-CIR
12. SPE_SELEC
13. DUPINT
14. DATA-BD
15. DATA-CHL
16. SW-CTL
17. PROCR
18. PR-MAINT
19. 12V-PWR
20. CARD-MEM
21. FL-DATA
22. PI-BD
23. PI-PT
24. PKT-CTRL